Disputes with neighbors 

What are the official rights and obligations of the controller otk. Product quality controller Product and process quality controller

We bring to your attention a typical example of a job description for a product processing quality inspector, a sample of 2019. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of the product processing quality inspector is issued on hand against receipt.

It provides typical information about the knowledge that a product processing quality inspector should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. The product processing quality inspector belongs to the category of workers.

2. A person with an average professional education or initial vocational education and special training and work experience of _______ years.

3. The product processing quality controller is hired and dismissed by the director of the organization on the proposal of the head of production (section, workshop)

4. The product processing quality controller must know:

a) special (professional) knowledge of the position:

— technical requirements imposed on the quality of processing at all stages of the technological process;

— methods of technical quality control of processing;

- requirements for placing orders accepted for processing; the procedure for returning incorrectly accepted or executed orders to the receiving points;

- action of solvents, chemical materials and dyes for products, accessories and finishing materials;

- assortment and labeling of products;

— type and fibrous composition of materials;

- rules for the acquisition of production batches; operating in production technological instructions, enterprise standards, republican standards and specifications;

- rules for storage and transportation of products;

- types of manufacturing defects, methods of its prevention and elimination;

- the procedure for issuing documentation on the quality of services provided and irreparable marriage;

b) general knowledge of the employee of the organization:

— rules and norms of labor protection, safety measures, industrial sanitation and fire protection,

- rules for the use of personal protective equipment;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- types of marriage and ways to prevent and eliminate it;

- production signaling.

5. In its activities, the product processing quality controller is guided by:

- the legislation of the Russian Federation,

— Charter of the organization,

- orders and orders of the director of the organization,

- this job description,

— Rules of internal labor regulations of the organization,

— __________________________________________________.

6. The product processing quality controller reports directly to a worker with a higher qualification, the head of production (section, workshop) and the director of the organization.

7. During the absence of the product processing quality inspector (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (section, workshop) in the prescribed manner, who acquires the appropriate rights, duties and is responsible for performance of the duties assigned to him.

2. Job responsibilities of the product processing quality controller

The duties of the product processing quality controller are:

a) Special (professional) official duties:

— Quality control of product processing at various stages of the technological process.

– Return to the collection points of products accepted without indicating defects or due to incompleteness of orders.

– Checking the correctness of determining the types of technological processing, conducting preparatory operations and observing the rules for completing production batches.

– Review of products and determination of the quality of processing in accordance with the current technological instructions, enterprise standards, republican standards and specifications.

– Selection of products with processing defects and establishing the reasons for the marriage.

– Registration of relevant documentation for rejected products indicating the type and nature of the marriage.

- Sending damaged products for drawing up an act.

- Accounting for checked and rejected products.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization,

— internal rules and norms of labor protection, safety measures, industrial sanitation and fire protection.

– Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in proper condition;

- Maintenance of established technical documentation

3. Rights of the product processing quality controller

The product processing quality controller has the right to:

1. Submit proposals for management consideration:

– to improve the work related to the provisions of this responsibilities,

- on bringing to material and disciplinary responsibility of employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the product processing quality controller

The product processing quality inspector is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description of the product processing quality controller - sample 2019. Job responsibilities of the product processing quality inspector, rights of the product processing quality inspector, responsibility of the product processing quality inspector.

This manual has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Foreword

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Controller of the quality of products and the technological process of the 4th category" belongs to the category "Workers".

1.2. Qualification requirements - vocational education. Retraining, and work experience in a technologically related profession of 3 categories - at least 1 year.

1.3. Knows and applies:
- the range of products that are produced;
- parameters of the technological process;
- device, principle of operation of equipment and instrumentation in the area that is serviced;
- sampling rules and analysis methods;
- the impact of the condition of the equipment on the quality of the products that are produced;
- state standards and specifications for raw materials and finished products.

1.4. The quality controller of products and the technological process of the 4th category is appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. The quality controller of products and the technological process of the 4th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The quality controller of products and the technological process of the 4th category manages the work of _ _ _ _ _ _ _ _ _ _ .

1.7. The product and process quality controller of the 4th category during the absence is replaced by a duly appointed person who acquires the relevant rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Controls the course of the technological process at the site that is being serviced, behind the readings of control and measuring instruments and the results of analyzes according to control cards (analysis of the finished product, condensate, water, melts, analyzes of gas emissions into the atmosphere, etc.).

2.2. Conducts incoming quality control of raw materials and materials (verifies the results of the analysis according to the quality certificate, passport; issues conclusions on suitability for use in production).

2.3. Accepts batches of products from the shops.

2.4. Conducts interoperational quality control of products for export and special products.

2.5. Prepares certificates for non-sort products.

2.6. Participates in the consideration of claims and complaints from consumers.

2.7. Controls the observance by the apparatchiks of the technological regulations according to the instruction card.

2.8. Evaluates the technical condition of operating equipment.

2.9. Controls timely and correct sampling.

2.10. Carries out control of the internal condition of rolling stock bodies (railway cars, mineral carriers) and provides permission to use it for loading.

2.11. Participates in the acceptance of equipment after technological shutdowns, cleanings and repairs.

2.12. Knows, understands and applies the current regulatory documents relating to its activities.

2.13. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The quality controller of products and technological process of the 4th category has the right to take actions to prevent and eliminate the occurrence of any violations or inconsistencies.

3.2. The quality controller of products and the technological process of the 4th category has the right to receive all social guarantees provided for by law.

3.3. The quality controller of products and the technological process of the 4th category has the right to demand assistance in the performance of their duties and the exercise of rights.

3.4. The quality controller of products and the technological process of the 4th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. The quality controller of products and the technological process of the 4th category has the right to get acquainted with the draft documents relating to his activities.

3.6. The quality controller of products and the technological process of the 4th category has the right to request and receive documents, materials and information necessary for the performance of their duties and orders of the management.

3.7. Quality controller of products and technological process of the 4th category has the right to improve their professional qualifications.

3.8. The quality controller of products and the technological process of the 4th category has the right to report all violations and inconsistencies identified in the course of its activities and make proposals for their elimination.

3.9. The quality controller of products and the technological process of the 4th category has the right to get acquainted with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The quality controller of products and the technological process of the 4th category is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The quality controller of products and the technological process of the 4th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The quality controller of products and the technological process of the 4th category is responsible for the disclosure of information about the organization (enterprise / institution), which is a trade secret.

4.4. Quality controller of products and technological process of the 4th category is responsible for non-fulfillment or improper fulfillment of the requirements of internal normative documents organizations (enterprises/institutions) and legal orders of management.

4.5. The quality controller of products and the technological process of the 4th category is responsible for offenses committed in the course of its activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The quality controller of products and the technological process of the 4th category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The quality controller of products and the technological process of the 4th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

APPROVE:

[Job title]

_______________________________

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"______" _______________ 20___

JOB DESCRIPTION

Quality controller of products and technological process of the 4th category

1. General Provisions

1.1. real job description determines and regulates the powers, functional and official duties, rights and responsibilities of the 4th category product and process quality controller [Name of the organization in the genitive case] (hereinafter referred to as the Company).

1.2. The quality controller of products and the technological process of the 4th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The quality controller of products and the technological process of the 4th category belongs to the category of workers and reports directly to [name of the position of the immediate supervisor in the dative case] of the Company.

1.4. Quality controller of products and technological process of the 4th category is responsible for:

  • timely and high-quality performance of tasks for their intended purpose;
  • compliance with performance and labor discipline;
  • observance of labor safety measures, maintenance of order, compliance with fire safety rules in the work area (workplace) entrusted to him.

1.5. A person who has a secondary specialized education in this specialty and at least 1 year of work experience is appointed to the position of product quality and technological process inspector of the 4th category.

1.6. AT practical activities the quality controller of products and the technological process of the 4th category should be guided by:

  • local acts and organizational and administrative documents of the Company;
  • internal labor regulations;
  • rules of labor protection and safety, ensuring industrial sanitation and fire protection;
  • instructions, orders, decisions and instructions of the immediate supervisor;
  • this job description.

1.7. The quality controller of products and the technological process of the 4th category must know:

  • state standards and specifications for raw materials used, finished products;
  • range of finished products;
  • physico-chemical and technological properties of the used raw materials, materials and finished products;
  • device, principle of operation of the serviced equipment, used instrumentation;
  • technological regime of controlled processes;
  • methods for monitoring the progress of the technological process;
  • sampling rules and analysis methods;
  • rules for receiving and processing batches of products;
  • classification of types of marriage;
  • rules for the storage and accounting of toxic substances;
  • instructions on the control and procedure for registration of shipped lots.

1.8. During the period of temporary absence of the quality controller of products and the technological process of the 4th category, his duties are assigned to [name of the position of the deputy].

Responsibilities

Quality control of products and the progress of the technological process in the serviced area according to the indications of instrumentation and analysis results. Reception from the shops of batches of products. Quality control of plastic films on special installations with the elimination of identified defects. Conducting step-by-step control of semi-finished products and finished products. Carrying out analyzes of products and raw materials, issuing conclusions on the conformity of product quality, packaging and labeling with the requirements of state standards and technical conditions and shipping permits. Interoperational quality control of products for export and special products. Maintaining a register of product grades with the classification of defects. Registration of acts on out-of-grade products. Participation in the consideration of claims and complaints from consumers. Monitoring compliance with the technological regime in the serviced area. Control over timely and correct sampling. Grade technical condition working equipment. Participation in the reception of serviced equipment after technological stops, cleanings, repairs.

Need to know and be able to:

state standards and specifications for raw materials used, finished products; range of finished products; physico-chemical and technological properties of the used raw materials, materials and finished products; device, principle of operation of the serviced equipment, used instrumentation; technological regime of controlled processes; methods for monitoring the progress of the technological process; sampling rules and analysis methods; rules for receiving and processing batches of products; classification of types of marriage; rules for the storage and accounting of toxic substances; instructions on the control and procedure for registration of shipped lots.

Responsibilities

Implementation of control over compliance with established technological regimes at all stages of the production process in serviced areas, in workshops, departments. Coordination of the work of product quality controllers and the technological process. Quality control and completeness of products. Registration of technical documentation certifying the quality and completeness of manufactured or supplied products. Monitoring compliance with instructions and procedures for technical control and testing at the workplace. Monitoring the implementation of schedules for checking the accuracy of measuring production equipment and tooling, the technical condition of control and measuring equipment, their availability at the workplace and their timely provision for verification. Organization of accounting for product defects, analysis of the reasons for defects and the occurrence of manufacturing defects in semi-finished products and products. Development and implementation of measures to improve product quality, eliminate the causes that cause the manufacture and release of low-quality semi-finished products and products. Development and issuance, based on the results of control and testing, of the necessary proposals and recommendations to production personnel in controlled areas to eliminate the causes of poor product quality for their prompt use in work and inclusion in projects aimed at improving product quality.

Need to know and be able to:

controlled technological processes and their modes; basic technological and design data of the manufactured products; requirements for the used raw materials, materials, components and finished products, state standards and specifications for them; means and methods of technical control of production; design features of particularly precise and complex instruments and installations, methods of their adjustment and alignment; methods and methods for determining the error in testing on various especially complex instruments.