Housing and communal services 

Job description of a mechanical testing laboratory assistant. Training of a laboratory assistant for physical and mechanical tests

Job Description. Physical and mechanical testing of metals, raw materials, products, alloys, various materials, semi-finished products and finished products for strength, tensile, bending, heat resistance, compression, removal and pushing force, tear, hardness, airtightness, viscosity, fuzziness, twisting, thickness, moisture, water resistance , fat content and other quality indicators on control and testing installations, on Rockwell, Brinell devices, etc. in accordance with the current instructions. Measurement of electrical resistance by the bridge method and by the ampervoltmeter method. Density determination by hydrostatic weighing. Checking the size of the cells and the density of knots and connections. Determination of the percentage of shrinkage and glue. Maintain established test records. Preparation and degreasing of samples for testing. Selection and preparation of instruments and apparatus for testing. Adjustment of instruments and apparatus under the guidance of a laboratory assistant of higher qualification. Preparation of developer and fixer according to a given recipe, processing of photographic paper, film and plates, making prints from photo negatives.

Must know: classification of physical and mechanical tests; basic physical and mechanical properties of the tested metals and materials; elementary information about the electrical properties of metals and non-metallic materials; specific electrical resistance; methods for determining the density of electrolyte; methodology for preparing samples for testing; fundamentals of electrical engineering within the limits of the work performed; rules for the storage and use of photographic materials: chemical reagents, photographic paper, photographic plates; methods of preparation of the developer and fixer according to the recipe; the procedure for selecting and processing samples according to the types of properties of the analyzed materials, raw materials, semi-finished products and finished products; the principle of operation of the serviced equipment and the rules for handling it during the analysis and testing; test results recording system; state standards and specifications for testing; purpose of instrumentation, tools and rules for their use.

§ 121. Laboratory assistant for physical and mechanical testing (3rd category)

Job Description. Physical and mechanical testing of raw materials, materials, semi-finished products and finished products with the performance of work on processing and summarizing the results of the tests. Performing calculations to determine the quality indicators of materials, raw materials, semi-finished products and finished products. Determination of conformity of tested samples to state standards and specifications. Preparation of prototypes in laboratory conditions. Determination of fineness of grinding, uniformity of volume change, setting time and bulk density of materials. Calculation of the magnitude of loads by the size of the samples. Determination of temperatures using thermocouples when testing for thermal stability of samples. Thermocouple mounting. Correction for cold junction temperature. Determination of the modulus of normal elasticity and shear modulus by radio engineering, standardization of the installation to determine the modules. Measurement of magnetic permeability on a ballistic installation. Correction for the geometric dimensions of the sample. Regulation of the uniformity of heating of the sample in length, control of the temperature of heating by thermocouples. Measurement of rarefaction with a thermocouple vacuum gauge up to 174 - 1.3 Pa (up to 1.31 - 10 mm Hg). Changing the oil in the foreline pump. Checking and adjustment of laboratory equipment in the process of testing. Monitoring the passage of an experimental batch of raw materials, materials and semi-finished products in production. Graphic representation of test results.

Must know: the arrangement of the serviced equipment; the recipe, types, purpose and features of the materials to be tested, raw materials, semi-finished products and finished products; rules for conducting physical and mechanical tests of varying complexity with the performance of work on their processing and generalization; the principle of operation of ballistic installations for determining magnetic permeability; main units of vacuum systems of foreline and diffusion pumps, thermocouple vacuum gauge; basic methods for determining the physical properties of samples; basic properties of magnetic bodies; thermal expansion of alloys; a method for determining the coefficients of linear expansion of critical points on dilatometers; a method for determining temperature using high- and low-temperature thermometers; elastic properties of metals and alloys; rules for amending the geometric dimensions of the sample; methods for constructing graphs; a system of records of ongoing tests and a methodology for summarizing the results of tests.

§ 122. Laboratory assistant for physical and mechanical testing (4th category)

Job Description. Determination of magnetic susceptibility, magnetic permeability, residual induction, coercive force. Removing the hysteresis loop on the permeameter. Checking the wire for homogeneity and for thermoelectromotive force with standards. Temperature control of cold junctions of thermocouples. Removal of thermal cycles of cooling and heating of the sample. Creating a high vacuum in installations, measuring it with vacuum gauges. Determination of thermal conductivity, heat capacity and electrical conductivity. Determination of thermal expansion coefficients and critical points on a vacuum dilatometer. Adjustment of the applied devices and their adjustment. Determination of the yield strength of metal according to the diagram. Compilation of calculation tables. Calibration of thermocouples and dilatometers for the manufacture and refinement of temperature scales. Measurement of soil temperature with mercury inertial thermometers. Carrying out control tests. Working with light beam oscilloscopes. Selecting the required vibrator, installing it in a magnetic block. Calculation of residual stresses by the ring method according to these measurements. Adjustment of the optical system and the oscilloscope timer. Oscillogram processing.

Must know: arrangement of permeameters, installations for determining the magnetic properties of metals in constant magnetic fields, potentiometers for temperature control, installations for determining thermal conductivity, heat capacity and electrical conductivity, light beam oscilloscopes, ionization and magnetic discharge manometers; ferro-, dia- and paramagnetic materials; dependence of magnetic permeability on the field; basic methods for determining magnetic properties; methods of work on a permeameter, ferrotester, installation for determining magnetic susceptibility; fundamentals of materials science; methods for measuring high vacuum; methods for detecting leaks and their elimination; thermal properties of metals and alloys; methods for determining thermal conductivity and heat capacity; fundamentals of metal science and heat treatment; values ​​of allowable loads and stresses on the material being tested; limits of strength and yield in tension and bending, fatigue limits, maximum stresses.

§ 123. Laboratory assistant for physical and mechanical testing (5th category)

Job Description. Physical and mechanical testing of all types of welded joints, pipes of various diameters, sheet and profile rolled products with obtaining all characteristics in accordance with technical requirements and conditions. Carrying out various non-standard tests. Tests of finished units, products and chains, calibration of special torque-adjustable devices. Assembly of circuits and devices for non-standard tests. Calibration of recording and recording equipment. Carrying out tests using various strain gauges. Removal of decay curves and supercooled austenite on an anisometer and temperature curves in the manufacture of control thermocouples. Determination of linear expansion coefficients on automatic high-temperature dilatometers. Determination of the thermal properties of substances on a calorimeter with electronic heating. Determination of the damping factor of samples in the low frequency range. Determination of the purity of metals after zone melting by measuring the residual resistance at liquid helium temperature. Filling vessels with compressed and liquefied gases. Carrying out current repairs and adjustments of used equipment.

Must know: the methodology for conducting mechanical tests of various welds, pipes, rolled products, finished units and products; the principle of calculation and drawing up diagrams for non-standard tests; arrangement of light-beam oscilloscopes, strain gauges and strain gauge equipment; installation of automatic high-temperature dilatometers, installations for determining internal friction in metals, calorimeters, various types of installations for determining the residual electrical resistance of metals and alloys, anisometers; basics of dilatometry within the limits of the work performed; state diagram of iron carbon; the effect of alloying elements on the physical properties of metals and alloys; a method for determining thermal expansion on high-temperature dilatometers in an inert gas environment; rules for taking diagrams of isothermal decomposition of supercooled austenite at low and high temperatures using a bath of liquid nitrogen, oil and liquid tin; properties of materials at low temperatures; properties of liquefied gases; methodology for determining the residual electrical resistance; mathematical processing of experimental data; rules for working with liquid nitrogen; methodology for determining the physical properties of materials.

§ 124. Laboratory assistant for physical and mechanical testing (6th category)

Job Description. Carrying out physical and mechanical tests to determine the electrical conductivity and temperature coefficient of resistance in samples of micron cross section of increased complexity. Removal of thermokinematic curves on the anisometer and dilatometer at temperatures from -196 degrees. C and higher. Determination of the thermal properties of substances by electron bombardment. Turning on, maintaining and turning off high-temperature heaters. Measurement of electrical conductivity, thermal conductivity, thermal expansion coefficient, emissivity at high temperatures in vacuum and inert media. Determination of characteristics of thermoelectrode materials at cryogenic temperatures. Determination of the damping factor in the region of high frequencies and high temperatures. Participation in the development of methods for new alloys and metrological certification of installations.

Must know: principles of high-temperature heating; dependence of heating temperature on power consumption; materials for high temperature heaters; the role of heat shields; the principle of heating substances by electron bombardment; the main regularities of electron heating and temperature distribution over the sample during its bombardment with electrons; methods for determining the physical properties of materials at temperatures above 1000 degrees. C; methods for measuring high temperatures using reference pyrometers; methods for calibrating thermocouples according to reference pyrometers; features of the design of high-temperature installations; ways to reduce heat loss; methods for accounting for heat losses and the introduction of corrections for heat losses in the mathematical processing of measurement results.

Secondary education required.

APPROVE:

[Job title]

_______________________________

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"______" _______________ 20___

JOB DESCRIPTION

Laboratory assistant for physical and mechanical tests of the 3rd category

1. General Provisions

1.1. Real job description determines and regulates the powers, functional and official duties, rights and responsibilities of a laboratory assistant for physical and mechanical tests of the 3rd category [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. category is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The laboratory assistant for physical and mechanical tests of the 3rd category belongs to the category of workers and reports directly to [position title of the immediate supervisor in the dative case] of the Company.

1.4. A person who has a secondary vocational education and appropriate training without presenting requirements for work experience is appointed to the position of a laboratory assistant for physical and mechanical tests of the 3rd category.

1.5. In practice, a laboratory assistant for physical and mechanical tests of the 3rd category should be guided by:

  • local acts and organizational and administrative documents of the Company;
  • internal labor regulations;
  • rules of labor protection and safety, ensuring industrial sanitation and fire protection;
  • instructions, orders, decisions and instructions of the immediate supervisor;
  • this job description.

1.6. The laboratory assistant for physical and mechanical tests of the 3rd category must know:

  • arrangement of serviced equipment;
  • recipe, types, purpose and features of materials, raw materials, semi-finished products and finished products to be tested;
  • rules for conducting physical and mechanical tests of varying complexity with the performance of work on their processing and generalization;
  • the principle of operation of ballistic installations for determining magnetic permeability;
  • main units of vacuum systems of foreline and diffusion pumps, thermocouple vacuum gauge;
  • basic methods for determining the physical properties of samples;
  • basic properties of magnetic bodies;
  • thermal expansion of alloys;
  • a method for determining the coefficients of linear expansion of critical points on dilatometers;
  • a method for determining temperature using high- and low-temperature thermometers;
  • elastic properties of metals and alloys;
  • rules for amending the geometric dimensions of the sample;
  • charting methods;
  • a system of records of ongoing tests and a methodology for summarizing test results.

1.7. During the period of temporary absence of a laboratory assistant for physical and mechanical tests of the 3rd category, his duties are assigned to [name of the position of the deputy].

2. Job responsibilities

Laboratory assistant for physical and mechanical tests of the 3rd category performs the following labor functions:

2.1. Physical and mechanical testing of raw materials, materials, semi-finished products and finished products with the performance of work on processing and summarizing the results of the tests.

2.2. Performing calculations to determine the quality indicators of materials, raw materials, semi-finished products and finished products.

2.3. Determining the compliance of the tested samples with state standards and specifications.

2.4. Preparation of prototypes in laboratory conditions.

2.5. Determination of fineness of grinding, uniformity of volume change, setting time and bulk density of materials.

2.6. Calculation of the magnitude of loads by the size of the samples.

2.7. Determination of temperatures using thermocouples when testing for thermal stability of samples.

2.8. Thermocouple mounting.

2.9. Correction for cold junction temperature.

2.10. Determination of the modulus of normal elasticity and shear modulus by radio engineering, standardization of the installation for determining the modules.

2.11. Measurement of magnetic permeability on a ballistic installation. Correction for the geometric dimensions of the sample.

2.12. Regulation of sample heating uniformity along its length, heating temperature control by thermocouples.

2.13. Measurement of rarefaction with a thermocouple vacuum gauge up to 174-1.3 Pa (up to 1.31-10 millimeters of mercury).

2.14. Changing the oil in the foreline pump.

2.15. Checking and adjustment of laboratory equipment in the process of testing.

2.16. Monitoring the passage of an experimental batch of raw materials, materials and semi-finished products in production.

2.17. Graphic representation of test results.

In case of official necessity, a laboratory assistant for physical and mechanical tests of the 3rd category may be involved in the performance of his duties. official duties overtime, in the manner prescribed by law.

3. Rights

Laboratory assistant for physical and mechanical tests of the 3rd category has the right to:

3.1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

3.2. Submit proposals for the management to improve the work related to the responsibilities provided for in this job description.

3.3. Report to the immediate supervisor about all the shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.

3.4. Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of their duties.

3.5. Involve specialists from all (separate) structural divisions of the Company in solving the tasks assigned to him (if it is provided for by the regulations on structural divisions, if not, with the permission of the head of the Company).

3.6. Require the management of the enterprise to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. The laboratory assistant for physical and mechanical tests of the 3rd category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of a laboratory assistant in physical and mechanical tests of the 3rd category is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Attestation Commission of the enterprise - periodically, but at least once every two years based on the documented results of the work for the evaluation period.

4.3. The main criterion for evaluating the work of a laboratory assistant in physical and mechanical tests of the 3rd category is the quality, completeness and timeliness of his performance of the tasks provided for by this instruction.

5. Working conditions

5.1. The mode of work of a laboratory assistant for physical and mechanical tests of the 3rd category is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production necessity, the laboratory assistant for physical and mechanical tests of the 3rd category is obliged to go on business trips (including local ones).

Acquainted with the instruction ___________ / ____________ / "____" _______ 20__

Exam tickets comply with the Order of the Ministry of Education and Science of Russia dated 02.08.2013 N 915 "On approval of the federal state educational standard middle vocational education by profession 240100.01 Laboratory assistant for physical and mechanical testing "(Registered in the Ministry of Justice of Russia on August 20, 2013 N 29491)

Exam tickets Laboratory assistant for physical and mechanical tests, contain references in the regulatory and technical literature to the correct answers, which allows you to quickly and efficiently prepare for certification

IV. CHARACTERISTICS OF PROFESSIONAL

GRADUATE ACTIVITIES

4.1. The field of professional activity of graduates: physical and mechanical testing of raw materials, materials, semi-finished products and finished products in various sectors of the economy.

4.2. The objects of professional activity of graduates are:

raw materials and materials;

finished products and semi-finished products;

laboratory equipment;

instruments and test benches;

normative and technical documentation.

4.3. A student by profession 240100.01 Laboratory assistant for physical and mechanical testing is preparing for the following activities:

4.3.1. Preparation of samples for testing.

4.3.2. Preparation of equipment for physical and mechanical testing.

4.3.3. Performing physical and mechanical tests on laboratory equipment.

4.3.4. Compliance with the rules and practices of safety, industrial sanitation and fire safety.

5.2. A graduate who has mastered the PPKRS should have professional competencies corresponding to the types of activity:

5.2.1. Preparation of samples for testing.

PC 1.1. Produce prototypes in the laboratory.

PC 1.2. Determine the compliance of the parameters of the tested samples with GOST and TU.

5.2.2. Preparation of equipment for physical and mechanical testing.

PC 2.1. Check laboratory equipment.

PC 2.2. Make simple adjustments to laboratory equipment.

PC 2.3. Perform equipment adjustments.

5.2.3. Performing physical and mechanical tests on laboratory equipment.

PC 3.1. Start and stop laboratory equipment.

PC 3.2. Observe the operation of the equipment during testing.

PC 3.3. Take readings from instruments.

PC 3.4. Perform calculations and graphic work related to the tests.

PC 3.5. Prepare reports on the work done.

5.2.4. Compliance with the rules and practices of safety, industrial sanitation and fire safety.

PC 4.1. Be familiar with safety procedures for testing.

PC 4.2. Use primary fire extinguishing equipment.

PC 4.3. Provide first aid to the victim.

Course Topics:

Topic 1 General professional training cycle

As a result of studying the compulsory part of the educational cycle, a student in general professional disciplines must:

control the implementation of grounding, grounding;

start and stop the electric motors installed on the operated equipment;

take readings of work and use electrical equipment in compliance with safety standards and operating rules;

basic concepts of direct and alternating electric current, series and parallel connection of conductors and current sources, units of measurement for current strength, voltage, electric current power, conductor resistance, electric and magnetic fields;

essence and methods of measuring electrical quantities, design and technical characteristics of measuring instruments;

basic laws of electrical engineering;

rules for graphic representation and drawing up electrical circuits;

symbols of electrical devices and electrical machines;

main elements of electrical networks;

principles of operation, device, main characteristics of electrical measuring instruments, electrical machines, control and protection equipment, power supply schemes;

motors of direct and alternating current, their device, principle of operation, rules for starting, stopping;

safety rules for working with electrical appliances OP.01.

Topic 2 Technical drawing

general information about assembly drawings, the appointment of conventions and simplifications used in the drawings, the rules for preparing and reading working drawings;

main provisions of design, technological and other regulatory documentation;

geometric constructions and rules for drawing technical details, methods of graphical representation technological equipment and implementation of technological schemes;

requirements of ESKD and ESTD standards for the design and preparation of drawings and diagrams

Topic 3 Fundamentals of materials science and technology of general plumbing work

determine the properties and classify materials used in production by composition, purpose and method of preparation;

select basic structural materials with similar coefficients of thermal expansion;

perform general plumbing work: marking, cutting, straightening, bending, cutting, filing, metal scraping, drilling, countersinking and reaming of holes, riveting, soldering, tinning and gluing, threading;

use tools and instrumentation when performing plumbing work;

basic information about the purpose and properties of metals and alloys, about the technology of their production;

main types, properties and applications of structural metallic and non-metallic materials used in production;

features of the structure of metals and alloys;

types of gaskets and sealing materials;

classification and properties of metals and alloys, basic protective materials, composite materials;

types of mechanical, chemical and heat treatment of metals and alloys;

methods for measuring parameters and determining the properties of materials;

basic information about crystallization and structure of melts;

basic properties of polymers and their use; methods of heat treatment and protection of metals from corrosion;

types of plumbing work and technology for their implementation;

device, purpose, rules for the selection and use of tools and instrumentation used in the performance of plumbing work;

requirements for the quality of processing parts;

types of wear of parts and assemblies;

properties lubricants

Topic 4 Fundamentals of technical mechanics

methodology for calculating structural elements for strength, stiffness and stability for various types of deformation OP.04.

assemble structures from parts according to drawings and diagrams;

determine stresses in structural elements;

types of wear and deformation of parts and assemblies;

types of lubricants, requirements for the properties of oils used to lubricate components and parts, rules for storing lubricants;

kinematics of mechanisms, connections of machine parts, mechanical transmissions, types and arrangement of gears;

purpose and classification of bearings;

main types of lubricating devices;

types, purpose, device of reducers;

friction, its types, the role of friction in technology;

device and purpose of tools and instrumentation used in maintenance and repair of equipment;

a method for calculating structural elements for strength, stiffness and stability under various types of deformation

Topic 5 Labor protection

use means of individual and group protection;

apply safe labor practices on the territory of the enterprise and in production premises;

use eco-bioprotective and fire-fighting equipment;

identify and analyze traumatic and harmful factors in the field of professional activity;

types and rules for conducting labor protection briefings;

possible dangerous and harmful factors and means of protection;

the effect of toxic substances on the human body;

fire and explosion prevention measures;

regulatory documents on labor protection and health, the basics of professional hygiene, professional sanitation and fire safety;

general safety requirements on the territory of the enterprise and in production premises;

main causes of fires and explosions;

legal and organizational framework for labor protection at the enterprise, a system of measures for the safe operation of hazardous production facilities and reducing the harmful effects on the environment, preventive measures for safety and industrial sanitation;

rights and obligations of employees in the field of labor protection;

principles of forecasting the development of events and assessing the consequences of man-made emergencies and natural phenomena;

means and methods for improving security technical means and technological processes

Topic 6 Life safety

organize and carry out activities to protect workers and the public from the negative impacts of emergency situations;

take preventive measures to reduce the level of various types of hazards and their consequences in professional activities and everyday life;

use means of individual and collective protection against weapons of mass destruction; use primary fire extinguishing means;

navigate the list of military registration specialties and independently determine among them those related to the received profession;

apply professional knowledge in the course of performing the duties of military service in military positions in accordance with the profession received;

own ways of conflict-free communication and self-regulation in everyday activities and extreme conditions of military service;

provide first aid to the injured;

the principles of ensuring the sustainability of economic facilities, forecasting the development of events and assessing the consequences in man-made emergencies and natural phenomena, including in the context of countering terrorism as a serious threat to Russia's national security;

the main types of potential hazards and their consequences in professional activities and everyday life, the principles for reducing the likelihood of their implementation;

fundamentals of military service and defense of the state;

tasks and main activities of civil defense;

ways to protect the population from weapons of mass destruction; fire safety measures and rules of safe behavior in case of fires;

organization and procedure for conscription of citizens for military service and admission to it on a voluntary basis;

the main types of weapons, military equipment and special equipment in service (equipment) of military units in which there are military registration specialties related to the professions of SPO;

the scope of the acquired professional knowledge in the performance of military service duties;

procedure and rules for providing first aid to victims

Topic 7 Technique for preparing samples for physical and mechanical tests

Preparation of samples for testing

have practical experience:

production of prototypes in laboratory conditions;

determining the conformity of the parameters of the tested samples with GOST and TU;

prepare samples from various materials for testing;

draw up documentation for the selected samples;

own technical documentation;

make corrections for the geometric dimensions of the samples;

carry out degreasing of samples;

draw up a protocol for amendments;

composition, properties, types and purpose of the samples to be tested;

the procedure for selecting and processing samples;

methodology for preparing samples for testing;

state standards and specifications for samples of materials and products;

rules for amending the geometric dimensions of samples;

methods for degreasing samples;

locksmith technology;

basic concepts of tolerances and technical measurements;

rules for reading drawings;

methodology for drawing up a protocol for non-compliance of the sample with the requirements of GOST and making changes

Topic 8 Technique for preparing laboratory equipment for physical and mechanical testing

Preparation of equipment for physical and mechanical testing

As a result of studying the professional module, the student must:

have practical experience:

carrying out checks of laboratory equipment;

simple adjustment of laboratory equipment;

performance of works on adjustment of the equipment;

monitor the condition of laboratory equipment;

prepare equipment for physical and mechanical testing;

carry out simple adjustment of equipment;

check laboratory equipment;

observe the operation of the equipment during testing;

make adjustments when equipment malfunctions are detected;

equipment for carrying out physical and mechanical tests, classification, purpose, device, principle of operation;

the sequence of preparation and rules for managing equipment for conducting physical and mechanical tests;

possible malfunctions in the equipment, methods and means of their detection and elimination;

instrumentation used in the preparation of equipment, their types, purpose, methods of measurement

Topic 9 Technology for performing physical and mechanical tests

Performing physical and mechanical tests on laboratory equipment

As a result of studying the professional module, the student must:

have practical experience:

start-up and shutdown of laboratory equipment;

monitoring the operation of equipment during testing;

taking readings from instruments;

performing calculations and graphic works related to the ongoing tests;

preparation of reports on the work done;

take readings from instruments;

keep work logs;

process and formalize the results of tests and measurements;

perform computational and graphic work related to the ongoing tests;

draw up technical documentation;

purpose and main characteristics of devices;

designation on the scales and methods for determining the division price;

methods and means of processing, systematization and registration of test and measurement results;

methods and means of performing technical calculations, computational and graphic works;

classification of errors;

errors of indirect measurements and installation;

error prevention methods;

current state standards and technical specifications for the developed documentation, its form, content and execution procedure

Topic 10 Safety regulations, industrial sanitation and fire safety

Compliance with the rules and practices of safety, industrial sanitation and fire safety

As a result of studying the professional module, the student must:

have practical experience:

possession of safety techniques during testing;

use of primary fire extinguishing means;

providing first aid to the victim;

ensure compliance with sanitary and hygienic requirements, norms and rules for labor protection;

handle primary means of protection and fire extinguishing;

requirements for safety and labor protection at the enterprise;

basics of professional hygiene and industrial sanitation;

norms, rules of electrical safety;

measures, fire extinguishing means;

environmental protection measures

The profession of a laboratory assistant for physical and mechanical tests is quite in demand and promising today. New modern laboratories are being opened, with the latest equipment, which requires qualified personnel for research and work. An important condition is the availability of professional education. Heads of enterprises are required to regularly send employees to special preparatory courses to learn how to work with new equipment and improve the skills of personnel.

The Interregional Training Center guarantees high-quality training and retraining of specialists in the profession of a laboratory assistant for physical and mechanical tests. For training, all modern, proven training programs and materials are used.

The purpose of training is the training or retraining of specialists, obtaining new theoretical knowledge and practical skills in working with modern laboratory equipment. Training course provides a large number of practical exercises, consultations to gain in-depth knowledge. The teaching staff closely monitors changes in legislation and promptly responds to them with a change in curriculum. Thus, guaranteeing a high-quality level of training, taking into account the specifics and areas of activity.

Distance learning is possible, without interruption from the main activity. In order to enroll in courses, leave a request on our website.

Our advantages:

  • Five years successful work training center guarantee a professional approach and a quality training program;
  • Vocational training license issued by the Moscow Department of Education;
  • Experienced teaching staff;
  • Specially equipped classroom for practical training;
  • Guaranteed quality knowledge at affordable prices.

Studying time:

Contact us and your application will be processed immediately!