Inheritance and donation 

Job description of a laboratory assistant in the production of building materials. Laboratory assistant (Industrial laboratory) Job description of a laboratory assistant of an accredited waste laboratory

We bring to your attention a typical example of a job description for a laboratory assistant in the production of building materials, a sample of 2019. A person with a secondary vocational education, special training and work experience can be appointed to this position. Do not forget that each instruction of a laboratory assistant for the production of building materials is issued on hand against receipt.

It provides typical information about the knowledge that a laboratory assistant in the production of building materials should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. Laboratory assistant for the production of building materials belongs to the category of workers.

2. A person with an average professional education and _________ years of work experience.

3. A laboratory assistant for the production of building materials is hired and dismissed by the director of the organization on the proposal of _______.

4. Laboratory assistant for the production of building materials must know:

a) special (professional) knowledge of the position:

— the device of the serviced equipment;

- the recipe, types, purpose and features of the materials, raw materials, semi-finished products and finished products to be tested;

— rules for conducting laboratory tests;

– current state standards, technical conditions and technological regulations;

- the appointment of instrumentation, tools and rules for using them;

— a system for recording test results;

b) general knowledge of the employee of the organization:

— rules and norms of labor protection, safety measures, industrial sanitation and fire protection,

- rules for the use of personal protective equipment;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- types of marriage and ways to prevent and eliminate it;

- production signaling.

5. In his activities, the laboratory assistant for the production of building materials is guided by:

- the legislation of the Russian Federation,

— Charter of the organization,

- orders and orders of the director of the organization,

- this job description,

— Rules of internal work schedule organizations.

6. The laboratory assistant for the production of building materials reports directly to ________ a worker with a higher qualification, the head of production (section, workshop) and the director of the organization

7. During the absence of a laboratory assistant for the production of building materials (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of _______ in the prescribed manner, who acquires the appropriate rights, duties and is responsible for the performance of his duties.

2. Job responsibilities of a laboratory assistant for the production of building materials

The duties of a laboratory assistant for the production of building materials are:

a) Special (professional) duties:

— Carrying out input quality control of raw materials, fuel, components.

– Control of the moisture content of raw materials, charge, silicate and ceramic molding masses, sludge, raw bricks and others.

— Conducting the process of blending materials.

– Determination of fineness of grinding, fineness modulus, grain composition, setting time; uniformity of volume change; degree of shrinkage and shrinkage; bulk mass; residue on the sieve when screening materials; water absorption.

— Preparation of samples for analysis.

— Checking the quality of molding sands and charge.

— Control of compliance with the established technological parameters.

— Determining the conformity of the tested samples and specimens with the requirements normative documents and technological regulations.

- Keeping working records in journals according to established forms.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

– Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in good condition.

3. Rights of a laboratory assistant in the production of building materials

The laboratory assistant for the production of building materials has the right to:

1. Submit proposals for management consideration:

– to improve the work related to the provisions of this responsibilities,

— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to fulfill his official duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the laboratory assistant for the production of building materials

The laboratory assistant for the production of building materials is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by labor legislation Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description laboratory assistant for the production of building materials - a sample of 2019. Job duties of a laboratory assistant in the production of building materials, rights of a laboratory assistant in the production of building materials, responsibility of a laboratory assistant in the production of building materials.

1. Laboratory engineer belongs to the category of specialists.
2. For the position:
- a laboratory engineer is appointed a person who has a higher professional (technical) education without presenting requirements for work experience or secondary vocational (technical) education and work experience in the position of a laboratory technician of category I for at least 3 years or other positions occupied by specialists with secondary professional (technical education), at least 5 years;
- laboratory engineer of category II - a person with a higher professional (technical) education and work experience as a laboratory engineer for at least 3 years;
- laboratory engineer of the 1st category - a person with a higher professional (technical) education and at least 3 years of work experience as a laboratory engineer of the 2nd category.
3. Appointment to the position of a laboratory engineer and dismissal from it is carried out by order of the director of the enterprise.
4. Laboratory engineer must know:
4.1. Production technology.
4.2. Laboratory equipment and rules for its operation.
4.3. Technical requirements for raw materials, materials and finished products.
4.4. Standards, regulations, instructions and other guidelines for the technological preparation of production, laboratory control and execution of technical documentation.
4.5. Methods for conducting scientific research and organizing laboratory control of production.
4.6. Modern means of computer technology, communications and communications.
4.7. Experience of advanced domestic and foreign enterprises in the field of technology for the production of similar products.
4.8. Fundamentals of labor legislation.
4.9. Rules and norms of labor protection, safety measures, industrial sanitation and fire protection.
5. Laboratory engineer reports directly (to the head; head of the laboratory)
6. During the absence of a laboratory engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
II. Job Responsibilities
Laboratory engineer:
1. Manages or conducts laboratory analyses, tests and other types of research, raw materials, semi-finished products, materials, structures and finished products to determine compliance with applicable specifications and standards.
2. Performs experimental and research work to find more economical and effective methods production, as well as laboratory control of production.
3. Carries out the necessary calculations for the analysis, testing and research, analyzes the results and systematizes them.
4. Takes part in the development technological processes and their research during the development period, in the development and implementation of standards and specifications for raw materials, semi-finished products, materials used in production, as well as in the establishment of progressive norms for their consumption.
5. Based on the study of advanced domestic experience in conducting laboratory research at the enterprise, it develops new and improves the current methods for conducting laboratory analyses, tests and research, and assists in their development.
6. Investigates the causes of defects in production and takes part in the development of proposals for its prevention and elimination.
7. Develops measures for the integrated use of raw materials, for the replacement of scarce materials and seeks ways to dispose of production waste.
8. Monitors the correct operation of laboratory equipment and its timely submission for periodic state verification.
III. Rights
The laboratory engineer has the right:
1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
2. Submit proposals for the management to improve the work related to the duties provided for in this job description.
3. Report to the immediate supervisor about all the shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
4. Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of his duties.
5. Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
6. Require the management of the enterprise to assist in the performance of his duties and rights.
IV. A responsibility
The laboratory engineer is responsible for:
1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.

APPROVE:

[Job title]

_______________________________

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"______" _______________ 20___

JOB DESCRIPTION

Construction laboratory engineer

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of a construction laboratory engineer [Name of organization in the genitive case] (hereinafter referred to as the Construction Laboratory).

1.2. The construction laboratory engineer belongs to the category of specialists, is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Construction Laboratory.

1.3. The engineer of the construction laboratory reports directly to the [name of the position of the immediate supervisor in the dative case] of the Construction Laboratory.

1.4. A person who has:

Construction laboratory engineer of the 1st category:

  • higher professional education in the specialty "Construction", "Industrial and civil construction", "Production of building materials, products and structures", professional retraining in the direction of professional activity;
  • at least 3 years of work experience as an engineer of a construction laboratory of II category;

Construction laboratory engineer II category:

  • professional retraining in the direction of professional activity;
  • at least 3 years of experience as a construction laboratory engineer;
  • advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

Construction laboratory engineer:

  • higher professional education in the specialty "Construction", "Industrial and civil construction", "Production of building materials, products and structures";
  • professional retraining in the direction of professional activity without presenting requirements for work experience;
  • advanced training at least once every 5 years and the presence of a qualification certificate for compliance with the position held or secondary vocational (technical) education and work experience as a laboratory technician of category I for at least 3 years;
  • advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

1.5. The construction laboratory engineer must know:

  • laws and other regulatory legal acts of the Russian Federation in the field of urban planning;
  • administrative, methodological and regulatory documents relating to the conduct of laboratory research;
  • production technology;
  • rules for the operation of laboratory equipment;
  • technical requirements applied to raw materials, materials and finished products;
  • standards, regulations, instructions and other documents on technological preparation of production, laboratory control and execution of technical documentation;
  • methods of scientific research and organization of laboratory control of production;
  • types of modern means of computer technology, communications and communications;
  • experience of advanced domestic and foreign enterprises in the field of technology for the production of similar products;
  • fundamentals of labor legislation;
  • rules on labor protection, safety precautions, industrial sanitation and fire protection.

1.6. The engineer of the construction laboratory in his work is guided by:

  • requirements of the legislation of the Russian Federation;
  • local acts and organizational and administrative documents of the Construction Laboratory;
  • internal labor regulations;
  • rules of labor protection and safety, ensuring industrial sanitation and fire protection;
  • instructions, orders, decisions and instructions of the immediate supervisor;
  • this job description.

1.7. During the period of temporary absence of the engineer of the construction laboratory, his duties are assigned to [deputy position].

2. Job responsibilities

The engineer of the construction laboratory is obliged to perform the following labor functions:

2.1. Supervises or conducts laboratory analyses, tests and other types of research, raw materials, semi-finished products, materials, structures and finished products to determine compliance with applicable specifications and standards.

2.2. Performs experimental and research work to find more economical and efficient methods of production, as well as laboratory control of production.

2.3. Carries out the necessary calculations for the analysis, testing and research, analyzes the results and systematizes them.

2.4. He takes part in the development of technological processes and their research during the development period, in the development and implementation of standards and specifications for raw materials, semi-finished products, materials used in production, as well as in the establishment of progressive norms for their consumption.

2.5. Based on the study of the best domestic experience in conducting laboratory research in the organization, it develops new and improves existing methods for conducting laboratory analyses, tests and research, and assists in their development.

2.6. Investigates the causes of marriage in production and takes part in the development of proposals for its prevention and elimination.

2.7. Develops measures for the integrated use of raw materials, for the replacement of scarce materials and seeks ways to dispose of production waste.

2.8. Monitors the correct operation of laboratory equipment and its timely submission for periodic state verification.

In case of official necessity, a construction laboratory engineer may be involved in the performance of his official duties overtime, by decision of the Deputy Director for Production, in the manner prescribed by law.

3. Rights

The construction laboratory engineer has the right to:

3.1. Get acquainted with the draft decisions of the management of the Construction Laboratory relating to its activities.

3.2. Submit proposals for improvement of the work related to the responsibilities provided for in this instruction for consideration by the management.

3.3. Within the limits of his competence, report to his immediate supervisor about all the shortcomings identified in the course of his activities and make proposals for their elimination.

3.4. Request personally or on behalf of the management of the Construction Laboratory from the departments of the organization and other specialists information and documents necessary for the performance of their duties.

3.5. Involve specialists from all (individual) structural divisions in solving the tasks assigned to him.

3.6. Require the management of the organization to assist in the performance of their duties.

4. Responsibility

The construction laboratory engineer bears administrative, disciplinary and material (and in individual cases provided for by the legislation of the Russian Federation - and criminal) liability for:

4.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.2. Failure or improper performance of labor functions and the tasks assigned to him.

4.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.4. Inaccurate information about the status of the work entrusted to him.

4.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.6. Failure to enforce labor discipline.

5. Working conditions

5.1. The work schedule of a construction laboratory engineer is determined in accordance with the internal labor regulations established in the Construction Laboratory.

5.2. In connection with the production need, the engineer of the construction laboratory is obliged to go on business trips (including local ones).

Acquainted with the instructions ______ / ____________ / "__" _______ 20__

Supervises or conducts laboratory analyses, tests and other types of research of raw materials, semi-finished products, materials, structures and finished products to determine compliance with applicable specifications and standards. Performs experimental and research work to find more economical and efficient methods of production, as well as laboratory control of production. Makes the necessary calculations on the analysis, testing and research, analyzes the results and systematizes them. He takes part in the development of technological processes and their research during the development period, in the development and implementation of standards and specifications for raw materials, semi-finished products, materials used in production, as well as in the establishment of progressive norms for their consumption. Develops new and improves existing methods of laboratory analysis, testing and research, assists in their development. Investigates the causes of marriage in production and takes part in the development of proposals for its prevention and elimination. Develops measures for the integrated use of raw materials, for the replacement of scarce materials with other types of materials and seeks ways to dispose of production waste. Monitors the correct operation of laboratory equipment and its timely submission for periodic state verification.

Must know

production technology; laboratory equipment and rules for its operation; technical requirements for raw materials, materials and finished products; current standards in production, GOSTs, as well as regulations, instructions and other guidance materials on the technological preparation of production, laboratory control and execution of technical documentation; methods of scientific research and organization of laboratory control of production; experience of advanced domestic and foreign enterprises in the field of technology for the production of similar products; rules of labor protection, safety measures and industrial sanitation.

Qualifications

Higher education without requirements for work experience or secondary specialized education and work experience as a laboratory technician or other engineering and technical positions for at least 3 years.

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2019
Part No. 2 of issue No. 40 ETKS
The issue is approved by the Decree of the Ministry of Labor of the Russian Federation of May 17, 2001 N 41

Laboratory assistant for the production of building materials

§ 91. Laboratory assistant for the production of building materials of the 3rd category

Job Description. Carrying out input quality control of raw materials, fuel, components. Moisture control of raw materials, charge, silicate and ceramic molding masses, sludge, raw bricks and others. Conducting the process of blending materials. Determination of fineness of grinding, fineness modulus, grain composition, setting time; uniformity of volume change; degree of shrinkage and shrinkage; bulk mass; residue on the sieve when screening materials; water absorption. Preparation of samples for analysis. Checking the quality of molding sands and charge. Monitoring compliance with the established technological parameters. Determination of the compliance of the tested samples and specimens with the requirements of regulatory documents and technological regulations. Keeping working records in journals according to established forms.

Must know: arrangement of serviced equipment; recipe, types, purpose and features of materials, raw materials, semi-finished products and finished products to be tested; rules for conducting laboratory tests; current state standards, technical conditions and technological regulations; the appointment of instrumentation, tools and rules for using them; system for recording test results.

§ 92. Laboratory assistant for the production of building materials of the 4th category

Job Description. Drawing up recipes for the preparation of charge and molding sands for the production of building materials and products. Carrying out analyzes of charge and molding sands. Adjustment of instruments and machines used for testing. Determination of the content of active oxides in lime, silicate mass and lime-sand binder. Determination of the fineness of grinding, the specific surface of the binder, sand, sludge, spreadability of the sludge. Control of the initial and final temperature of the mixture in the process of molding concrete products, control of the composition of the molding mass and glaze in the production of ceramic tiles. Determination of indicators of raw materials, impregnating materials and dressing to the established requirements of regulatory documents in production thermal insulation materials. Physical and mechanical tests raw materials, materials, semi-finished products and finished products for strength, tension, bending, compression, removal and pushing force, rupture, viscosity. Processing and summarizing the test results. Performing calculations to determine quality indicators. Calculation of the magnitude of loads by the size of the sample. Testing samples for heat resistance. Regulation of the uniformity of heating of reinforcing bars along the length, control of the heating temperature. Carrying out analyzes for the content of precious metals in products, semi-finished products and production waste. Analysis of ash obtained from the incineration of industrial waste. Weighing of precious metals. Maintenance of laboratory and heating devices. Recording analysis results in work logs. Formulation and calculation of analysis results. Control analyzes of solutions obtained from production sites (pickling, passivating, alkaline). Selection and preparation of samples and specimens for testing.

Must know: the principle of operation of the serviced laboratory equipment and the rules for handling it during testing and analysis; properties of raw materials, semi-finished products and finished products to be tested; requirements for the quality of samples and analyzes; test methods; methodology for summarizing test results; manufacturing technology of products; controlled parameters established by the technological regulations; current state standards, specifications for the materials used and finished products.